Furlongs to Micrometers calculator

Furlongs

Ten furlong marker at the Newmarket Race.

Source: Wikipedia

Micrometers

A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for precise measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers. Micrometers are usually, but not always, in the form of calipers (opposing ends joined by a frame). The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil.

Source: Wikipedia

Furlongs to Micrometers Conversion Table

Below you can generate and download as CSV, Excel, PDF or print the Furlongs to Micrometers conversion table based on your needs.

Selected rounding: none (You can change it above in the dropdown)

• Furlongs (201.16.84 meters)

  A furlong is a measure of distance in imperial units and U.S. customary units equal to one eighth of a mile, equivalent to 660 feet, 220 yards, 40 rods, or 10 chains. Using the international definition of the inch as exactly 25.4 millimetres, one furlong is 201.168 metres. However, the United States does not uniformly use this conversion ratio. Older ratios are in use for surveying purposes in some states, leading to variations in the length of the furlong of two parts per million, or about 0.4 millimetres (1⁄64 inch). This variation is too small to have practical consequences in most applications. Five furlongs are about 1.0 kilometre (1.00584 km is the exact value, according to the international conversion).

• Micrometer (0.000001 meters)

  The micrometre (International spelling as used by the International Bureau of Weights and Measures; SI symbol: μm) or micrometer (American spelling), also commonly known as a micron, is an SI derived unit of length equaling 1×10−6 metre (SI standard prefix "micro-" = 10−6); that is, one millionth of a metre (or one thousandth of a millimetre, 0.001 mm, or about 0.000039 inch).