Therms to Tonnes of oil equivalent calculator

Therms to Tonnes of oil equivalent Conversion Table

Below you can generate and download as CSV, Excel, PDF or print the Therms to Tonnes of oil equivalent conversion table based on your needs.

Selected rounding: none (You can change it above in the dropdown)

• Tonnes of oil equivalent (41,868,000,000 J)

  Tonne of oil equivalent (toe) is a unit of energy, defined as the amount of energy released by burning one tonne (1000 Kilograms) of crude oil.

• Therm (105,505,600 J)

  Not to be confused with Thermies unit. The therm (symbol, thm) is a non-SI unit of heat energy equal to 100,000 British thermal units (Btu). It is approximately the energy equivalent of burning 100 cubic feet (2.83 cubic metres) – often referred to as 1 CCF – of natural gas. Since natural gas meters measure volume and not energy content, a therm factor is used by natural gas companies to convert the volume of gas used to its heat equivalent, and thus calculate the actual energy use. The therm factor is usually expressed in units of therms per CCF. It will vary with the mix of hydrocarbons in the natural gas. Natural gas with a higher than average concentration of ethane, propane or butane will have a higher therm factor. Impurities, such as carbon dioxide or nitrogen, lower the therm factor. One therm is equal to about 105.5 megajoules, 25200 kilocalories, or 29.3 kilowatt-hours. One therm can also be provided by about 96.7 cubic feet (2.74 m3) of natural gas. The therm sometimes has been confused with the thermie. The names of both units come from the Greek word for heat.