Wattseconds to Therms calculator

Wattseconds to Therms Conversion Table

Below you can generate and download as CSV, Excel, PDF or print the Wattseconds to Therms conversion table based on your needs.

Selected rounding: none (You can change it above in the dropdown)

• Therm (105,505,600 J)

  Not to be confused with Thermies unit. The therm (symbol, thm) is a non-SI unit of heat energy equal to 100,000 British thermal units (Btu). It is approximately the energy equivalent of burning 100 cubic feet (2.83 cubic metres) – often referred to as 1 CCF – of natural gas. Since natural gas meters measure volume and not energy content, a therm factor is used by natural gas companies to convert the volume of gas used to its heat equivalent, and thus calculate the actual energy use. The therm factor is usually expressed in units of therms per CCF. It will vary with the mix of hydrocarbons in the natural gas. Natural gas with a higher than average concentration of ethane, propane or butane will have a higher therm factor. Impurities, such as carbon dioxide or nitrogen, lower the therm factor. One therm is equal to about 105.5 megajoules, 25200 kilocalories, or 29.3 kilowatt-hours. One therm can also be provided by about 96.7 cubic feet (2.74 m3) of natural gas. The therm sometimes has been confused with the thermie. The names of both units come from the Greek word for heat.

• Wattsecond (1 J)

  A watt second (also watt-second, symbol Ws) is a derived unit of energy equivalent to the joule. The watt-second is the energy equivalent to the power of one watt sustained for one second. While the watt-second is equivalent to the joule in both units and meaning, there are some contexts in which the term "watt-second" is used instead of "joule". The kilowatt hour (kWh) is equivalent to 3,600,000 watt-seconds and is a unit used in the electricity market, and by producers of electricity. Although joule and watt-second mean exactly the same thing (they represent the same amount of the same physical quantity, viz. energy), the newton metre is not equivalent to the joule (despite having the same dimensions) as it represents torque rather than energy. (In terms of vectors, torque is a cross product of force and distance, and energy is their dot product.)